产品
- RV系列双级旋片泵
- E2M系列双级旋片泵
- nES系列单级旋片泵
- ES系列单级旋片泵
- nXDS系列干式涡旋泵
- nXLi系列干式真空泵
- EDC系列爪式真空泵
- EOSi系列喷油螺杆泵
- EH系列罗茨真空泵
- EDS系列干式螺杆泵
- GXS系列干式螺杆泵
- GV系列爪式真空泵
- T-Station涡轮分子泵小车
- STP系列涡轮分子泵
- Stokes滑阀泵
- Stokes 6罗茨泵
- D-LAB系列隔膜真空泵
- nEXPT系列分子泵站
- nEXT系列涡轮分子泵
- EDP系列化工爪式干泵
- CXS系列化工螺杆真空泵
- CDX系列化工螺杆真空泵
- HT系列油蒸汽扩散泵
- iH系列半导体真空干泵
- iXH系列半导体真空泵
- iXL系列半导体真空干泵
- EPX系列半导体真空干泵
- GX系列半导体干式泵
产品详情
简单介绍：
Edwards NW16 KF16 中心环（不锈钢+氟橡胶） C10512490
Edwards NW16 KF16 中心环（不锈钢+氟橡胶） C10512490
详情介绍：
Edwards Trapped Centering O-Ring KF-16, NW-16, Stainless Steel & Fluoroelastomer Viton® PN C10512490
Edwards Trapped Centering O-Ring KF-16, NW-16, Stainless Steel & Fluoroelastomer Viton® PN C10512490
ISO-KF Flange Size: NW-16
Edwards NW16 KF16 中心环（不锈钢+氟橡胶） C10512490
Fluoroelastomer O-rings, our fluoroelastomer (VIT) Viton O-rings are manufactured from a copolymer of vinylidene fluoride and hexafluoro-propylene. Fluoroelastomer O-rings should be used in systems operated below 10-6 mbar. Fluoroelastomer O-rings take up a set as their operating temperature increases, but this does not affect their sealing properties in vacuum applications. A fluoroelastomer ‘O’ ring will restore to its normal shape after uncompressed exposure to atmosphere: accelerate this process by heating to 150 °C in air. The baking temperature of fluoroelastomer need not exceed 150 °C, since a higher temperature will not, after cooling; further reduce the outgassing rate of the fluoroelastomer. Fluoroelastomer O-rings have wider tolerances than those specified in BS1806.
They offer Very low outgassing rate (especially after baking) Chemical stability at high temperatures up to 200 °C, High resistance to oils and many chemical. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel with Viton® O-Ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.
They offer Very low outgassing rate (especially after baking) Chemical stability at high temperatures up to 200 °C, High resistance to oils and many chemical. A circumferential clamp and centering ring form the vacuum seal between the connecting flanges (please see top right figure - click to enlarge). The centering ring contains a rubber elastomer o-ring. The standard sizes for quick flange fittings are KF-10, KF-16, KF-25, KF-40, and KF-50 with flange sizes NW-10, NW-16, NW-25, NW-40, and NW-50, respectively. They are made of corrosive resistant stainless steel with Viton® O-Ring. Viton® is well known for its excellent resistance to heat (400°F/200°C) and to aggressive fuels and chemicals. Viton® is a registered trademark of DuPont Performance Elastomers.
Edwards Trapped Centering O-Ring KF-16, NW-16, Stainless Steel & Fluoroelastomer Viton® PN C10512490
ISO-KF Flange Size: NW-16
